SMP, Kutu Tipi Sıcaklık, 0-10V, 4-20mA, Hız ve Potansiyometer İçin İndikatör

Ürünün fiyat bilgisi için bize 0312 4739791 numaralı telefondan ya da adresinden ulaşabilirsiniz.



  • Ürün Özellikleri
  • Yorumlar (0)
  • Tavsiye Et
  • Resimler
  • Beni Ara
    • Inputs
      Input Modules Available 
      UADCV10 to 10V
      UADCA10 to 20mA
      UADCV2± 200mV
      UALV2Dual LVDT
      UAT1K Type Thermocouple
      UAT2J Type Thermocouple
      UAPTResistance Thermocouple (PT100)
      UAFLCFast (10mS) Strain Gauge
      UADIADual Channel 4 to 20mA Input - (speed 800mS per Channel)
      UADIVDual Channel 0 to 10V Input - (speed 800mS per Channel)
      UA12CRemote Driver
      Input Resolution15 bit/4.5 digits
      Contact InputsAre available for print and peak hold reset and are volt free
      Analogue Outputs
      Type4-20mA and 0-10V DC
      Drive4-20mA up to 1Kohm and 0-10 volts up to 2mA.
      Accuracy4-20mA + 0.15% of range, typical. 0-10V ±2% before calibration.
      Resolutionas for display up to 13 bits/4.5 digits. Settling time 350mS to within 1% of step change.
      Isolation±130V RMS or DC max to analogue input or any other port.
      Fast Analogue OutputFor use with the UAFLC
      Power Supplies
      110V-120V AC or 220/230V AC 50-60Hz 10W, 9-32V DC 10W isolated
      Data Retention/Protection
      Retention10 years for set up values, minimum of 100,000 write cycles.
      Protection of data and 
      Watchdog timer giving repeat auto resets. Impending power detection and hold off. Keypad security and time out.
      Other Options & Accessories
      2 Set PointsOutput through 5A, 230V AC SPCO relays, with a latching option
      Communications PortFor data transfer or print via :-
      20mA loopEnabling up to 254 units to be multi dropped to 1 x RS232 via IF25 interface(s)
      RS485Enabling up to 25 units to be multi dropped
      RS232For 1 to 1 connection and standard printer drive
      Printer OperationBy front panel function key
      Baud Rates300, 600, 1200, 2400, 4800, 9600 (19200 MANTRABUS only) 9600 for MODBUS
      Back LightingFor the LCD display
      DIN Rail MountingFor the CPU, PSU and output option modules
      DC Powering9-32V DC
      Remote MountingDisplay module, for panel mounting
      Storage Temperature-20 to +70ºC
      Operating Temperature-10 to 50ºC
      Relative Humidity95% maximum non condensing
      CE Environmental ApprovalsEuropean EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC

T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.